Introduction

The New R407C Beermaster is a flexible packaged cooling system, designed to fully incorporate the demands of todays cellar cooling industry. An extensive range of reliable, energy efficient, service friendly condensing units and evaporators catering for cooling capacities between 3 and 15 kW, with rated ambient temperatures up to 38°C. Selections are available with cellar temperatures from 4°C to 12°C, which will meet the increasing range of cooling requirements for pubs, clubs and wine bars. In addition sound levels have been minimised throughout the  ange of BMO condensing units and BMI evaporators

Consisting of compact BMO outdoor, weatherproof, housed units aligned with space saving BMI evaporators, the Climate Center Beermaster range is the solution to all cellar cooling applications. Operating two BMI evaporators will successfully cool cellars with irregular shapes (with one BMO condensing unit.) Temperature is controlled from one evaporator, the other acting as a slave unit. Beermaster BMO condensing units are designed to minimise sound levels, which together with an acoustic kit option enables a further 6 dB(A) reduction, in noise sensitive locations. The BMI  vaporator compact design incorporates an external rotor fan set, reducing sound, resonance and vibration, therefore minimising sound break out  nto bar and accommodation areas.

BMO Condensing Unit Specification Nominal sound pressure levels: 41 to 49 dB(A) at 10m. Lower sound levels are achieved using the acoustic kit. Housing: Fully weatherproof, with powder coat grey gloss finish (RAL7036). Compressor: BMO 100 – Hermetic complete with crankcase heater BMO 120 to 550 – Scroll complete with crankcase heater. Liquid Line: Receiver and sightglass. Controls: Externally accessible mains isolator. Contactor. HP and LP pressure switches. Fully wired and enclosed electrical assembly.

Fansets: Single phase, high efficiency, low noise external rotor design, rated to IP44.

Service: Maximum access for service maintenance. Simple hinged and removable panels Lid lifts up and latches, with two positions-full open or front access only.

Connections: Liquid and Suction angle service valves, pre-fitted with solder adaptors. External charging/gauge access ports.

Installation: Easy brazing to unit connections. Access without need to remove fixings. All components fully accessible from one side.

Outdoor Condensing unit

Indoor Chilling unit

Examples on brackets